Discussion:
Fujitsu iX500 - No scanners were identified.
(too old to reply)
Jiri
2016-11-21 11:40:48 UTC
Permalink
Raw Message
Hi,

[Debian Sid]

I started having problem with Fujitsu iX500 scanner after upgrade. It
used to work fine, but now it seems the system identifies the scanner
for a just a while and but apps cannot use it.

Here is example. I run the following command two times right after each
other. The scanner is recognized on first run (after plugging USB in),
but when I run it second time it says the scanner was not identified.

Any help would be appreciated.


***@knightrider:~$ SANE_DEBUG_FUJITSU=15 scanimage -L 
[sanei_debug] Setting debug level of fujitsu to 15.
[fujitsu] sane_init: start
[fujitsu] sane_init: fujitsu backend 1.0.127, from sane-backends 1.0.25
[fujitsu] sane_init: finish
[fujitsu] sane_get_devices: start
[fujitsu] sane_get_devices: reading config file fujitsu.conf
[fujitsu] sane_get_devices: setting "buffer-size" to 65536
[fujitsu] sane_get_devices: looking for 'scsi FUJITSU'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1041'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1042'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1078'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1095'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1096'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1097'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10ad'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10ae'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10af'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10cf'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e0'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e1'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e2'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e6'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e7'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10f2'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10fe'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1135'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114a'
[fujitsu] sane_get_devices: config option "buffer-size" (262144) is >
65536, warning!
[fujitsu] sane_get_devices: setting "buffer-size" to 262144
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114d'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114e'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114f'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1150'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1155'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x116f'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1174'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1175'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1176'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1177'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1178'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x119d'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x119e'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11a2'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f1'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f2'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f3'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f4'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11fc'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1213'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x128e'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132b'
[fujitsu] attach_one: start
[fujitsu] attach_one: looking for 'libusb:003:004'
[fujitsu] connect_fd: start
[fujitsu] connect_fd: opening USB device
[fujitsu] wait_scanner: start
[fujitsu] do_usb_cmd: start
[fujitsu] do_usb_cmd: finish
[fujitsu] wait_scanner: finish
[fujitsu] connect_fd: finish
[fujitsu] init_inquire: start
[fujitsu] do_usb_cmd: start
[fujitsu] do_usb_cmd: finish
[fujitsu] init_inquire: Found FUJITSU scanner ScanSnap iX500 version
0L00 at libusb:003:004
[fujitsu] inquiry options
[fujitsu]   color offset: 0 lines
[fujitsu]   long gray scan: 1
[fujitsu]   long color scan: 1
[fujitsu]   emulation mode: 0
[fujitsu]   CMP/CGA: 0
[fujitsu]   background back: 0
[fujitsu]   background front: 0
[fujitsu]   background fb: 0
[fujitsu]   back only scan: 1
[fujitsu]   duplex offset: 0 lines
[fujitsu] init_inquire: finish
[fujitsu] init_vpd: start
[fujitsu] do_usb_cmd: start
[fujitsu] do_usb_cmd: finish
[fujitsu] init_vpd: length=8b
[fujitsu] standard options
[fujitsu]   basic x res: 600 dpi
[fujitsu]   basic y res: 600 dpi
[fujitsu]   step x res: 1 dpi
[fujitsu]   step y res: 1 dpi
[fujitsu]   max x res: 600 dpi
[fujitsu]   max y res: 600 dpi
[fujitsu]   min x res: 50 dpi
[fujitsu]   min y res: 50 dpi
[fujitsu]   60 dpi: 1
[fujitsu]   75 dpi: 1
[fujitsu]   100 dpi: 1
[fujitsu]   120 dpi: 1
[fujitsu]   150 dpi: 1
[fujitsu]   160 dpi: 1
[fujitsu]   180 dpi: 1
[fujitsu]   200 dpi: 1
[fujitsu]   240 dpi: 1
[fujitsu]   300 dpi: 1
[fujitsu]   320 dpi: 1
[fujitsu]   400 dpi: 1
[fujitsu]   480 dpi: 1
[fujitsu]   600 dpi: 1
[fujitsu]   800 dpi: 0
[fujitsu]   1200 dpi: 0
[fujitsu]   max width: 8.71 inches
[fujitsu]   max length: 34.52 inches
[fujitsu]   overflow: 1
[fujitsu]   monochrome: 1
[fujitsu]   halftone: 1
[fujitsu]   grayscale: 1
[fujitsu]   color_monochrome: 0
[fujitsu]   color_halftone: 0
[fujitsu]   color_grayscale: 1
[fujitsu] vendor options
[fujitsu]   adf: 1
[fujitsu]   flatbed: 0
[fujitsu]   transparency: 0
[fujitsu]   duplex: 1
[fujitsu]   back endorser: 0
[fujitsu]   barcode: 0
[fujitsu]   operator panel: 1
[fujitsu]   front endorser: 0
[fujitsu]   multi-purpose stacker: 0
[fujitsu]   prepick: 0
[fujitsu]   mf detect: 0
[fujitsu]   paper protection: 0
[fujitsu]   A/D bits: 10
[fujitsu]   buffer bytes: 402653184
[fujitsu] Standard commands
[fujitsu]   mode_sense_10 cmd: 0
[fujitsu]   mode_select_10 cmd: 0
[fujitsu]   log_sense cmd: 0
[fujitsu]   log_select cmd: 0
[fujitsu]   change cmd: 0
[fujitsu]   read_buffer cmd: 0
[fujitsu]   write_buffer cmd: 0
[fujitsu]   copy_and_verify cmd: 0
[fujitsu]   compare cmd: 0
[fujitsu]   get_d_b_status cmd: 0
[fujitsu]   object_pos cmd: 1
[fujitsu]   send cmd: 1
[fujitsu]   read cmd: 1
[fujitsu]   get_window cmd: 0
[fujitsu]   set_window cmd: 1
[fujitsu]   send_diag cmd: 1
[fujitsu]   read_diag cmd: 1
[fujitsu]   scan cmd: 1
[fujitsu]   mode_sense_6 cmd: 1
[fujitsu]   copy cmd: 0
[fujitsu]   release cmd: 1
[fujitsu]   reserve_unit cmd: 1
[fujitsu]   mode_select_6 cmd: 1
[fujitsu]   inquiry cmd: 1
[fujitsu]   request_sense cmd: 1
[fujitsu]   test_unit_ready cmd: 1
[fujitsu] Vendor commands
[fujitsu]   subwindow cmd: 0
[fujitsu]   endorser cmd: 0
[fujitsu]   hardware status cmd: 1
[fujitsu]   hardware status 2 cmd: 0
[fujitsu]   hardware status 3 cmd: 0
[fujitsu]   scanner control cmd: 1
[fujitsu]   device restart cmd: 1
[fujitsu]   brightness steps: 0
[fujitsu]   threshold steps: 255
[fujitsu]   contrast steps: 0
[fujitsu]   built in gamma patterns: 0
[fujitsu]   download gamma patterns: 1
[fujitsu]   built in dither patterns: 4
[fujitsu]   download dither patterns: 1
[fujitsu]   RIF: 1
[fujitsu]   DTC (AutoI): 0
[fujitsu]   SDTC (AutoII): 1
[fujitsu]   outline extraction: 0
[fujitsu]   image emphasis: 1
[fujitsu]   automatic separation: 0
[fujitsu]   mirror image: 0
[fujitsu]   white level follower: 0
[fujitsu]   subwindow: 0
[fujitsu]   diffusion: 1
[fujitsu]   ipc3: 0
[fujitsu]   rotation: 0
[fujitsu]   hybrid crop deskew: 0
[fujitsu]   ipc2 byte 67: 0
[fujitsu]   compression MH: 0
[fujitsu]   compression MR: 0
[fujitsu]   compression MMR: 0
[fujitsu]   compression JBIG: 0
[fujitsu]   compression JPG1: 1
[fujitsu]   (Disabled)
[fujitsu]   compression JPG2: 0
[fujitsu]   compression JPG3: 0
[fujitsu]   back endorser mech: 0
[fujitsu]   back endorser stamp: 0
[fujitsu]   back endorser elec: 0
[fujitsu]   endorser max id: 0
[fujitsu]   front endorser mech: 0
[fujitsu]   front endorser stamp: 0
[fujitsu]   front endorser elec: 0
[fujitsu]   back endorser type: 0
[fujitsu]   back endorser type: 0
[fujitsu]   connection type: 3
[fujitsu]   endorser ext: 0
[fujitsu]   endorser pr_b: 0
[fujitsu]   endorser pr_f: 0
[fujitsu]   endorser po_b: 0
[fujitsu]   endorser po_f: 0
[fujitsu]   horizontal overscan: 153
[fujitsu]   vertical overscan: 153
[fujitsu]   default bg adf b: 0
[fujitsu]   default bg adf f: 0
[fujitsu]   default bg fb: 0
[fujitsu]   auto color: 1
[fujitsu]   blank skip: 1
[fujitsu]   multi image: 0
[fujitsu]   f b type indep: 0
[fujitsu]   f b res indep: 0
[fujitsu]   dropout spec: 0
[fujitsu]   dropout non: 0
[fujitsu]   dropout white: 0
[fujitsu]   skew check: 0
[fujitsu]   new feed roller: 0
[fujitsu]   paper count: 0
[fujitsu]   paper number: 0
[fujitsu]   ext send to: 0
[fujitsu]   staple det: 0
[fujitsu]   pause host: 0
[fujitsu]   pause panel: 0
[fujitsu]   pause conf: 0
[fujitsu]   hq print: 0
[fujitsu]   ext GHS len: 0
[fujitsu]   smbc func: 0
[fujitsu]   imprint chk b: 0
[fujitsu]   imprint chk f: 0
[fujitsu]   force w bg: 0
[fujitsu]   mf recover lvl: 0
[fujitsu]   first read time: 1
[fujitsu]   div scanning: 0
[fujitsu]   start job: 1
[fujitsu]   lifetime log: 1
[fujitsu]   imff save rest: 0
[fujitsu]   wide scsi type: 0
[fujitsu]   lut hybrid crop: 0
[fujitsu]   over under amt: 0
[fujitsu]   rgb lut: 0
[fujitsu]   num lut dl: 0
[fujitsu]   ErP Lot6 (power off timer): 1
[fujitsu]   sync next feed: 1
[fujitsu]   object postion halt: 0
[fujitsu] init_vpd: finish
[fujitsu] init_ms: start
[fujitsu]   autocolor: 0
[fujitsu]   prepick: 0
[fujitsu]   sleep: 0
[fujitsu]   duplex: 0
[fujitsu]   rand: 0
[fujitsu]   bg: 0
[fujitsu]   df: 0
[fujitsu]   dropout: 0
[fujitsu]   buff: 0
[fujitsu]   auto: 0
[fujitsu]   lamp: 0
[fujitsu]   jobsep: 0
[fujitsu] init_ms: finish
[fujitsu] init_model: start
[fujitsu] init_model: finish
[fujitsu] init_user: start
[fujitsu] init_user: finish
[fujitsu] init_options: start
[fujitsu] init_options: finish
[fujitsu] init_interlace: start
[fujitsu] update_params: start
[fujitsu] update_params: x: max=10448, page=10200, gpw=10200, res=600
[fujitsu] update_params: y: max=41424, page=13200, gph=13200, res=600
[fujitsu] update_params: area: tlx=0, brx=10200, tly=0, bry=13200
[fujitsu] update_params: params: ppl=5100, Bpl=15300, lines=6600
[fujitsu] update_params: params: format=1, depth=8, last=1
[fujitsu] update_u_params: start
[fujitsu] update_u_params: finish
[fujitsu] update_params: finish
[fujitsu] init_interlace: color_interlace: 1
[fujitsu] init_interlace: finish
[fujitsu] init_serial: start
[fujitsu] do_usb_cmd: start
[fujitsu] do_usb_cmd: finish
[fujitsu] do_usb_cmd: start
[fujitsu] do_usb_cmd: finish
[fujitsu] init_serial: found sn 64324
[fujitsu] init_serial: serial_name: ScanSnap iX500:64324
[fujitsu] init_serial: finish
[fujitsu] disconnect_fd: start
[fujitsu] disconnecting usb device
[fujitsu] disconnect_fd: finish
[fujitsu] attach_one: finish
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132c'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132d'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132e'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132f'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x13f4'
[fujitsu] sane_get_devices: found scanner libusb:003:004
[fujitsu] sane_get_devices: found 1 scanner(s)
[fujitsu] sane_get_devices: finish
device `fujitsu:ScanSnap iX500:64324' is a FUJITSU ScanSnap iX500
scanner
[fujitsu] sane_exit: start
[fujitsu] disconnect_fd: start
[fujitsu] disconnect_fd: finish
[fujitsu] sane_exit: finish
***@knightrider:~$ SANE_DEBUG_FUJITSU=15 scanimage -L 
[sanei_debug] Setting debug level of fujitsu to 15.
[fujitsu] sane_init: start
[fujitsu] sane_init: fujitsu backend 1.0.127, from sane-backends 1.0.25
[fujitsu] sane_init: finish
[fujitsu] sane_get_devices: start
[fujitsu] sane_get_devices: reading config file fujitsu.conf
[fujitsu] sane_get_devices: setting "buffer-size" to 65536
[fujitsu] sane_get_devices: looking for 'scsi FUJITSU'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1041'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1042'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1078'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1095'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1096'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1097'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10ad'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10ae'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10af'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10cf'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e0'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e1'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e2'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e6'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e7'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10f2'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10fe'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1135'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114a'
[fujitsu] sane_get_devices: config option "buffer-size" (262144) is >
65536, warning!
[fujitsu] sane_get_devices: setting "buffer-size" to 262144
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114d'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114e'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114f'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1150'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1155'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x116f'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1174'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1175'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1176'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1177'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1178'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x119d'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x119e'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11a2'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f1'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f2'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f3'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f4'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11fc'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1213'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x128e'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132b'
[fujitsu] attach_one: start
[fujitsu] attach_one: looking for 'libusb:003:004'
[fujitsu] connect_fd: start
[fujitsu] connect_fd: opening USB device
[fujitsu] wait_scanner: start
[fujitsu] do_usb_cmd: start
[fujitsu] stat: return error 'Error during device I/O'
[fujitsu] WARNING: Brain-dead scanner. Hitting with stick
[fujitsu] do_usb_cmd: start
[fujitsu] stat: return error 'Error during device I/O'
[fujitsu] WARNING: Brain-dead scanner. Hitting with stick again
[fujitsu] do_usb_cmd: start
[fujitsu] stat: return error 'Error during device I/O'
[fujitsu] wait_scanner: error 'Error during device I/O'
[fujitsu] wait_scanner: finish
[fujitsu] connect_fd: could not wait_scanner
[fujitsu] disconnect_fd: start
[fujitsu] disconnecting usb device
[fujitsu] disconnect_fd: finish
[fujitsu] connect_fd: finish
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132c'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132d'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132e'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132f'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x13f4'
[fujitsu] sane_get_devices: found 0 scanner(s)
[fujitsu] sane_get_devices: finish

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
[fujitsu] sane_exit: start
[fujitsu] sane_exit: finish
***@knightrider:~$ sane-find-scanner 

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make
sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

could not open USB device 0x8087/0x8001 at 001:002: Access denied
(insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 001:001: Access denied
(insufficient permissions)
found USB scanner (vendor=0x04c5 [Fujitsu], product=0x132b [ScanSnap
iX500]) at libusb:003:004
could not open USB device 0x1d6b/0x0003 at 003:001: Access denied
(insufficient permissions)
could not open USB device 0x04f2/0xb45d at 002:005: Access denied
(insufficient permissions)
could not open USB device 0x8087/0x0a2a at 002:004: Access denied
(insufficient permissions)
could not open USB device 0x138a/0x0017 at 002:003: Access denied
(insufficient permissions)
could not open USB device 0x04f3/0x012d at 002:002: Access denied
(insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 002:001: Access denied
(insufficient permissions)
  # Your USB scanner was (probably) detected. It may or may not be
supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary
ports
  # can't be detected by this program.

  # You may want to run this program as root to find all devices. Once
you
  # found the scanner devices, be sure to adjust access permissions as
  # necessary


Again after I plug the USB in my computer...

***@knightrider:~$ SANE_DEBUG_SNAPSCAN=128 scanimage -L
[sanei_debug] Setting debug level of snapscan to 128.
[snapscan] sane_snapscan_init
[snapscan] sane_snapscan_init: Snapscan backend version 1.4.53
[snapscan] sane_snapscan_get_devices (0x7ffd9e003240, 0)
device `fujitsu:ScanSnap iX500:64324' is a FUJITSU ScanSnap iX500
scanner
[snapscan] sane_snapscan_exit

***@knightrider:~$ SANE_DEBUG_SNAPSCAN=128 scanimage -L
[sanei_debug] Setting debug level of snapscan to 128.
[snapscan] sane_snapscan_init
[snapscan] sane_snapscan_init: Snapscan backend version 1.4.53
[snapscan] sane_snapscan_get_devices (0x7ffd2ac76300, 0)

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
[snapscan] sane_snapscan_exit


Thanks Jiri
m. allan noah
2016-11-22 02:02:21 UTC
Permalink
Raw Message
You did not tell us what you upgraded? Sane-backends, your scanner, your kernel?

This sounds like a pretty typical linux usb bug. You might need to
install a development version of sane-backends from our git repo. Once
you have built and installed a sane-backends git snapshot (using the
info in README.linux), you can run scanimage -L repeatedly. You may
find that the scanner only shows up intermittently. If that is the
case, try running this repeatedly instead:

SANE_USB_WORKAROUND=1 scanimage -L

That might work better. If so, you will have to put
SANE_USB_WORKAROUND=1 into your environment.

Oh, and BTW, your scanner is not supported by the snapscan backend.
Try fujitsu instead.

allan
Post by Jiri
Hi,
[Debian Sid]
I started having problem with Fujitsu iX500 scanner after upgrade. It used
to work fine, but now it seems the system identifies the scanner for a just
a while and but apps cannot use it.
Here is example. I run the following command two times right after each
other. The scanner is recognized on first run (after plugging USB in), but
when I run it second time it says the scanner was not identified.
Any help would be appreciated.
[sanei_debug] Setting debug level of fujitsu to 15.
[fujitsu] sane_init: start
[fujitsu] sane_init: fujitsu backend 1.0.127, from sane-backends 1.0.25
[fujitsu] sane_init: finish
[fujitsu] sane_get_devices: start
[fujitsu] sane_get_devices: reading config file fujitsu.conf
[fujitsu] sane_get_devices: setting "buffer-size" to 65536
[fujitsu] sane_get_devices: looking for 'scsi FUJITSU'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1041'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1042'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1078'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1095'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1096'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1097'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10ad'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10ae'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10af'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10cf'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e0'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e1'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e2'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e6'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e7'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10f2'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10fe'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1135'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114a'
[fujitsu] sane_get_devices: config option "buffer-size" (262144) is > 65536,
warning!
[fujitsu] sane_get_devices: setting "buffer-size" to 262144
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114d'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114e'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114f'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1150'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1155'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x116f'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1174'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1175'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1176'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1177'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1178'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x119d'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x119e'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11a2'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f1'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f2'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f3'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f4'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11fc'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1213'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x128e'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132b'
[fujitsu] attach_one: start
[fujitsu] attach_one: looking for 'libusb:003:004'
[fujitsu] connect_fd: start
[fujitsu] connect_fd: opening USB device
[fujitsu] wait_scanner: start
[fujitsu] do_usb_cmd: start
[fujitsu] do_usb_cmd: finish
[fujitsu] wait_scanner: finish
[fujitsu] connect_fd: finish
[fujitsu] init_inquire: start
[fujitsu] do_usb_cmd: start
[fujitsu] do_usb_cmd: finish
[fujitsu] init_inquire: Found FUJITSU scanner ScanSnap iX500 version 0L00 at
libusb:003:004
[fujitsu] inquiry options
[fujitsu] color offset: 0 lines
[fujitsu] long gray scan: 1
[fujitsu] long color scan: 1
[fujitsu] emulation mode: 0
[fujitsu] CMP/CGA: 0
[fujitsu] background back: 0
[fujitsu] background front: 0
[fujitsu] background fb: 0
[fujitsu] back only scan: 1
[fujitsu] duplex offset: 0 lines
[fujitsu] init_inquire: finish
[fujitsu] init_vpd: start
[fujitsu] do_usb_cmd: start
[fujitsu] do_usb_cmd: finish
[fujitsu] init_vpd: length=8b
[fujitsu] standard options
[fujitsu] basic x res: 600 dpi
[fujitsu] basic y res: 600 dpi
[fujitsu] step x res: 1 dpi
[fujitsu] step y res: 1 dpi
[fujitsu] max x res: 600 dpi
[fujitsu] max y res: 600 dpi
[fujitsu] min x res: 50 dpi
[fujitsu] min y res: 50 dpi
[fujitsu] 60 dpi: 1
[fujitsu] 75 dpi: 1
[fujitsu] 100 dpi: 1
[fujitsu] 120 dpi: 1
[fujitsu] 150 dpi: 1
[fujitsu] 160 dpi: 1
[fujitsu] 180 dpi: 1
[fujitsu] 200 dpi: 1
[fujitsu] 240 dpi: 1
[fujitsu] 300 dpi: 1
[fujitsu] 320 dpi: 1
[fujitsu] 400 dpi: 1
[fujitsu] 480 dpi: 1
[fujitsu] 600 dpi: 1
[fujitsu] 800 dpi: 0
[fujitsu] 1200 dpi: 0
[fujitsu] max width: 8.71 inches
[fujitsu] max length: 34.52 inches
[fujitsu] overflow: 1
[fujitsu] monochrome: 1
[fujitsu] halftone: 1
[fujitsu] grayscale: 1
[fujitsu] color_monochrome: 0
[fujitsu] color_halftone: 0
[fujitsu] color_grayscale: 1
[fujitsu] vendor options
[fujitsu] adf: 1
[fujitsu] flatbed: 0
[fujitsu] transparency: 0
[fujitsu] duplex: 1
[fujitsu] back endorser: 0
[fujitsu] barcode: 0
[fujitsu] operator panel: 1
[fujitsu] front endorser: 0
[fujitsu] multi-purpose stacker: 0
[fujitsu] prepick: 0
[fujitsu] mf detect: 0
[fujitsu] paper protection: 0
[fujitsu] A/D bits: 10
[fujitsu] buffer bytes: 402653184
[fujitsu] Standard commands
[fujitsu] mode_sense_10 cmd: 0
[fujitsu] mode_select_10 cmd: 0
[fujitsu] log_sense cmd: 0
[fujitsu] log_select cmd: 0
[fujitsu] change cmd: 0
[fujitsu] read_buffer cmd: 0
[fujitsu] write_buffer cmd: 0
[fujitsu] copy_and_verify cmd: 0
[fujitsu] compare cmd: 0
[fujitsu] get_d_b_status cmd: 0
[fujitsu] object_pos cmd: 1
[fujitsu] send cmd: 1
[fujitsu] read cmd: 1
[fujitsu] get_window cmd: 0
[fujitsu] set_window cmd: 1
[fujitsu] send_diag cmd: 1
[fujitsu] read_diag cmd: 1
[fujitsu] scan cmd: 1
[fujitsu] mode_sense_6 cmd: 1
[fujitsu] copy cmd: 0
[fujitsu] release cmd: 1
[fujitsu] reserve_unit cmd: 1
[fujitsu] mode_select_6 cmd: 1
[fujitsu] inquiry cmd: 1
[fujitsu] request_sense cmd: 1
[fujitsu] test_unit_ready cmd: 1
[fujitsu] Vendor commands
[fujitsu] subwindow cmd: 0
[fujitsu] endorser cmd: 0
[fujitsu] hardware status cmd: 1
[fujitsu] hardware status 2 cmd: 0
[fujitsu] hardware status 3 cmd: 0
[fujitsu] scanner control cmd: 1
[fujitsu] device restart cmd: 1
[fujitsu] brightness steps: 0
[fujitsu] threshold steps: 255
[fujitsu] contrast steps: 0
[fujitsu] built in gamma patterns: 0
[fujitsu] download gamma patterns: 1
[fujitsu] built in dither patterns: 4
[fujitsu] download dither patterns: 1
[fujitsu] RIF: 1
[fujitsu] DTC (AutoI): 0
[fujitsu] SDTC (AutoII): 1
[fujitsu] outline extraction: 0
[fujitsu] image emphasis: 1
[fujitsu] automatic separation: 0
[fujitsu] mirror image: 0
[fujitsu] white level follower: 0
[fujitsu] subwindow: 0
[fujitsu] diffusion: 1
[fujitsu] ipc3: 0
[fujitsu] rotation: 0
[fujitsu] hybrid crop deskew: 0
[fujitsu] ipc2 byte 67: 0
[fujitsu] compression MH: 0
[fujitsu] compression MR: 0
[fujitsu] compression MMR: 0
[fujitsu] compression JBIG: 0
[fujitsu] compression JPG1: 1
[fujitsu] (Disabled)
[fujitsu] compression JPG2: 0
[fujitsu] compression JPG3: 0
[fujitsu] back endorser mech: 0
[fujitsu] back endorser stamp: 0
[fujitsu] back endorser elec: 0
[fujitsu] endorser max id: 0
[fujitsu] front endorser mech: 0
[fujitsu] front endorser stamp: 0
[fujitsu] front endorser elec: 0
[fujitsu] back endorser type: 0
[fujitsu] back endorser type: 0
[fujitsu] connection type: 3
[fujitsu] endorser ext: 0
[fujitsu] endorser pr_b: 0
[fujitsu] endorser pr_f: 0
[fujitsu] endorser po_b: 0
[fujitsu] endorser po_f: 0
[fujitsu] horizontal overscan: 153
[fujitsu] vertical overscan: 153
[fujitsu] default bg adf b: 0
[fujitsu] default bg adf f: 0
[fujitsu] default bg fb: 0
[fujitsu] auto color: 1
[fujitsu] blank skip: 1
[fujitsu] multi image: 0
[fujitsu] f b type indep: 0
[fujitsu] f b res indep: 0
[fujitsu] dropout spec: 0
[fujitsu] dropout non: 0
[fujitsu] dropout white: 0
[fujitsu] skew check: 0
[fujitsu] new feed roller: 0
[fujitsu] paper count: 0
[fujitsu] paper number: 0
[fujitsu] ext send to: 0
[fujitsu] staple det: 0
[fujitsu] pause host: 0
[fujitsu] pause panel: 0
[fujitsu] pause conf: 0
[fujitsu] hq print: 0
[fujitsu] ext GHS len: 0
[fujitsu] smbc func: 0
[fujitsu] imprint chk b: 0
[fujitsu] imprint chk f: 0
[fujitsu] force w bg: 0
[fujitsu] mf recover lvl: 0
[fujitsu] first read time: 1
[fujitsu] div scanning: 0
[fujitsu] start job: 1
[fujitsu] lifetime log: 1
[fujitsu] imff save rest: 0
[fujitsu] wide scsi type: 0
[fujitsu] lut hybrid crop: 0
[fujitsu] over under amt: 0
[fujitsu] rgb lut: 0
[fujitsu] num lut dl: 0
[fujitsu] ErP Lot6 (power off timer): 1
[fujitsu] sync next feed: 1
[fujitsu] object postion halt: 0
[fujitsu] init_vpd: finish
[fujitsu] init_ms: start
[fujitsu] autocolor: 0
[fujitsu] prepick: 0
[fujitsu] sleep: 0
[fujitsu] duplex: 0
[fujitsu] rand: 0
[fujitsu] bg: 0
[fujitsu] df: 0
[fujitsu] dropout: 0
[fujitsu] buff: 0
[fujitsu] auto: 0
[fujitsu] lamp: 0
[fujitsu] jobsep: 0
[fujitsu] init_ms: finish
[fujitsu] init_model: start
[fujitsu] init_model: finish
[fujitsu] init_user: start
[fujitsu] init_user: finish
[fujitsu] init_options: start
[fujitsu] init_options: finish
[fujitsu] init_interlace: start
[fujitsu] update_params: start
[fujitsu] update_params: x: max=10448, page=10200, gpw=10200, res=600
[fujitsu] update_params: y: max=41424, page=13200, gph=13200, res=600
[fujitsu] update_params: area: tlx=0, brx=10200, tly=0, bry=13200
[fujitsu] update_params: params: ppl=5100, Bpl=15300, lines=6600
[fujitsu] update_params: params: format=1, depth=8, last=1
[fujitsu] update_u_params: start
[fujitsu] update_u_params: finish
[fujitsu] update_params: finish
[fujitsu] init_interlace: color_interlace: 1
[fujitsu] init_interlace: finish
[fujitsu] init_serial: start
[fujitsu] do_usb_cmd: start
[fujitsu] do_usb_cmd: finish
[fujitsu] do_usb_cmd: start
[fujitsu] do_usb_cmd: finish
[fujitsu] init_serial: found sn 64324
[fujitsu] init_serial: serial_name: ScanSnap iX500:64324
[fujitsu] init_serial: finish
[fujitsu] disconnect_fd: start
[fujitsu] disconnecting usb device
[fujitsu] disconnect_fd: finish
[fujitsu] attach_one: finish
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132c'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132d'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132e'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132f'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x13f4'
[fujitsu] sane_get_devices: found scanner libusb:003:004
[fujitsu] sane_get_devices: found 1 scanner(s)
[fujitsu] sane_get_devices: finish
device `fujitsu:ScanSnap iX500:64324' is a FUJITSU ScanSnap iX500 scanner
[fujitsu] sane_exit: start
[fujitsu] disconnect_fd: start
[fujitsu] disconnect_fd: finish
[fujitsu] sane_exit: finish
[sanei_debug] Setting debug level of fujitsu to 15.
[fujitsu] sane_init: start
[fujitsu] sane_init: fujitsu backend 1.0.127, from sane-backends 1.0.25
[fujitsu] sane_init: finish
[fujitsu] sane_get_devices: start
[fujitsu] sane_get_devices: reading config file fujitsu.conf
[fujitsu] sane_get_devices: setting "buffer-size" to 65536
[fujitsu] sane_get_devices: looking for 'scsi FUJITSU'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1041'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1042'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1078'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1095'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1096'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1097'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10ad'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10ae'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10af'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10cf'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e0'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e1'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e2'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e6'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e7'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10f2'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10fe'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1135'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114a'
[fujitsu] sane_get_devices: config option "buffer-size" (262144) is > 65536,
warning!
[fujitsu] sane_get_devices: setting "buffer-size" to 262144
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114d'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114e'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114f'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1150'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1155'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x116f'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1174'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1175'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1176'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1177'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1178'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x119d'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x119e'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11a2'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f1'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f2'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f3'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f4'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11fc'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1213'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x128e'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132b'
[fujitsu] attach_one: start
[fujitsu] attach_one: looking for 'libusb:003:004'
[fujitsu] connect_fd: start
[fujitsu] connect_fd: opening USB device
[fujitsu] wait_scanner: start
[fujitsu] do_usb_cmd: start
[fujitsu] stat: return error 'Error during device I/O'
[fujitsu] WARNING: Brain-dead scanner. Hitting with stick
[fujitsu] do_usb_cmd: start
[fujitsu] stat: return error 'Error during device I/O'
[fujitsu] WARNING: Brain-dead scanner. Hitting with stick again
[fujitsu] do_usb_cmd: start
[fujitsu] stat: return error 'Error during device I/O'
[fujitsu] wait_scanner: error 'Error during device I/O'
[fujitsu] wait_scanner: finish
[fujitsu] connect_fd: could not wait_scanner
[fujitsu] disconnect_fd: start
[fujitsu] disconnecting usb device
[fujitsu] disconnect_fd: finish
[fujitsu] connect_fd: finish
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132c'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132d'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132e'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132f'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x13f4'
[fujitsu] sane_get_devices: found 0 scanner(s)
[fujitsu] sane_get_devices: finish
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
[fujitsu] sane_exit: start
[fujitsu] sane_exit: finish
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure
that
# you have loaded a kernel SCSI driver for your SCSI adapter.
could not open USB device 0x8087/0x8001 at 001:002: Access denied
(insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 001:001: Access denied
(insufficient permissions)
found USB scanner (vendor=0x04c5 [Fujitsu], product=0x132b [ScanSnap iX500])
at libusb:003:004
could not open USB device 0x1d6b/0x0003 at 003:001: Access denied
(insufficient permissions)
could not open USB device 0x04f2/0xb45d at 002:005: Access denied
(insufficient permissions)
could not open USB device 0x8087/0x0a2a at 002:004: Access denied
(insufficient permissions)
could not open USB device 0x138a/0x0017 at 002:003: Access denied
(insufficient permissions)
could not open USB device 0x04f3/0x012d at 002:002: Access denied
(insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 002:001: Access denied
(insufficient permissions)
# Your USB scanner was (probably) detected. It may or may not be supported
by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary
Again after I plug the USB in my computer...
[sanei_debug] Setting debug level of snapscan to 128.
[snapscan] sane_snapscan_init
[snapscan] sane_snapscan_init: Snapscan backend version 1.4.53
[snapscan] sane_snapscan_get_devices (0x7ffd9e003240, 0)
device `fujitsu:ScanSnap iX500:64324' is a FUJITSU ScanSnap iX500 scanner
[snapscan] sane_snapscan_exit
[sanei_debug] Setting debug level of snapscan to 128.
[snapscan] sane_snapscan_init
[snapscan] sane_snapscan_init: Snapscan backend version 1.4.53
[snapscan] sane_snapscan_get_devices (0x7ffd2ac76300, 0)
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
[snapscan] sane_snapscan_exit
Thanks Jiri
--
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe your_password"
--
"well, I stand up next to a mountain- and I chop it down with the edge
of my hand"
--
sane-devel mailing list: sane-***@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe your_password"
to sane-devel-***@lists.alioth.debian.org
m. allan noah
2017-10-22 12:21:46 UTC
Permalink
Raw Message
What was the outcome from my suggestions last year?

allan
Hi,
1. When I use USB 3.0 Type B Plug connector (cable which comes with the
scanner), scanimage -L recognizes the scanner only once and applications like
Simple Scan or Skanlite are not able to scan.
2. However when I use USB 2.0 Type B Plug connector (i used cable from my
externar HDD), everything seems to work just fine.
My notebook has got all USB ports USB 3.0 and I don't have USB 2 hub to test.
Anyway using cable with old USB 2.0 B plug is simple workaround.
If I can provide any debug data, which can help to fix the issue, please let me
know and I can provide it for both cables.
- Jiri
Post by m. allan noah
You did not tell us what you upgraded? Sane-backends, your scanner, your kernel?
This sounds like a pretty typical linux usb bug. You might need to
install a development version of sane-backends from our git repo. Once
you have built and installed a sane-backends git snapshot (using the
info in README.linux), you can run scanimage -L repeatedly. You may
find that the scanner only shows up intermittently. If that is the
SANE_USB_WORKAROUND=1 scanimage -L
That might work better. If so, you will have to put
SANE_USB_WORKAROUND=1 into your environment.
Oh, and BTW, your scanner is not supported by the snapscan backend.
Try fujitsu instead.
allan
Post by Jiri
Hi,
[Debian Sid]
I started having problem with Fujitsu iX500 scanner after upgrade. It used
to work fine, but now it seems the system identifies the scanner for a just
a while and but apps cannot use it.
Here is example. I run the following command two times right after each
other. The scanner is recognized on first run (after plugging USB in), but
when I run it second time it says the scanner was not identified.
Any help would be appreciated.
[sanei_debug] Setting debug level of fujitsu to 15.
[fujitsu] sane_init: start
[fujitsu] sane_init: fujitsu backend 1.0.127, from sane-backends 1.0.25
[fujitsu] sane_init: finish
[fujitsu] sane_get_devices: start
[fujitsu] sane_get_devices: reading config file fujitsu.conf
[fujitsu] sane_get_devices: setting "buffer-size" to 65536
[fujitsu] sane_get_devices: looking for 'scsi FUJITSU'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1041'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1042'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1078'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1095'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1096'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1097'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10ad'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10ae'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10af'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10cf'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e0'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e1'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e2'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e6'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e7'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10f2'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10fe'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1135'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114a'
[fujitsu] sane_get_devices: config option "buffer-size" (262144) is >
65536, warning!
[fujitsu] sane_get_devices: setting "buffer-size" to 262144
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114d'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114e'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114f'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1150'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1155'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x116f'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1174'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1175'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1176'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1177'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1178'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x119d'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x119e'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11a2'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f1'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f2'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f3'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f4'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11fc'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1213'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x128e'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132b'
[fujitsu] attach_one: start
[fujitsu] attach_one: looking for 'libusb:003:004'
[fujitsu] connect_fd: start
[fujitsu] connect_fd: opening USB device
[fujitsu] wait_scanner: start
[fujitsu] do_usb_cmd: start
[fujitsu] do_usb_cmd: finish
[fujitsu] wait_scanner: finish
[fujitsu] connect_fd: finish
[fujitsu] init_inquire: start
[fujitsu] do_usb_cmd: start
[fujitsu] do_usb_cmd: finish
[fujitsu] init_inquire: Found FUJITSU scanner ScanSnap iX500 version 0L00
at libusb:003:004
[fujitsu] inquiry options
[fujitsu] color offset: 0 lines
[fujitsu] long gray scan: 1
[fujitsu] long color scan: 1
[fujitsu] emulation mode: 0
[fujitsu] CMP/CGA: 0
[fujitsu] background back: 0
[fujitsu] background front: 0
[fujitsu] background fb: 0
[fujitsu] back only scan: 1
[fujitsu] duplex offset: 0 lines
[fujitsu] init_inquire: finish
[fujitsu] init_vpd: start
[fujitsu] do_usb_cmd: start
[fujitsu] do_usb_cmd: finish
[fujitsu] init_vpd: length=8b
[fujitsu] standard options
[fujitsu] basic x res: 600 dpi
[fujitsu] basic y res: 600 dpi
[fujitsu] step x res: 1 dpi
[fujitsu] step y res: 1 dpi
[fujitsu] max x res: 600 dpi
[fujitsu] max y res: 600 dpi
[fujitsu] min x res: 50 dpi
[fujitsu] min y res: 50 dpi
[fujitsu] 60 dpi: 1
[fujitsu] 75 dpi: 1
[fujitsu] 100 dpi: 1
[fujitsu] 120 dpi: 1
[fujitsu] 150 dpi: 1
[fujitsu] 160 dpi: 1
[fujitsu] 180 dpi: 1
[fujitsu] 200 dpi: 1
[fujitsu] 240 dpi: 1
[fujitsu] 300 dpi: 1
[fujitsu] 320 dpi: 1
[fujitsu] 400 dpi: 1
[fujitsu] 480 dpi: 1
[fujitsu] 600 dpi: 1
[fujitsu] 800 dpi: 0
[fujitsu] 1200 dpi: 0
[fujitsu] max width: 8.71 inches
[fujitsu] max length: 34.52 inches
[fujitsu] overflow: 1
[fujitsu] monochrome: 1
[fujitsu] halftone: 1
[fujitsu] grayscale: 1
[fujitsu] color_monochrome: 0
[fujitsu] color_halftone: 0
[fujitsu] color_grayscale: 1
[fujitsu] vendor options
[fujitsu] adf: 1
[fujitsu] flatbed: 0
[fujitsu] transparency: 0
[fujitsu] duplex: 1
[fujitsu] back endorser: 0
[fujitsu] barcode: 0
[fujitsu] operator panel: 1
[fujitsu] front endorser: 0
[fujitsu] multi-purpose stacker: 0
[fujitsu] prepick: 0
[fujitsu] mf detect: 0
[fujitsu] paper protection: 0
[fujitsu] A/D bits: 10
[fujitsu] buffer bytes: 402653184
[fujitsu] Standard commands
[fujitsu] mode_sense_10 cmd: 0
[fujitsu] mode_select_10 cmd: 0
[fujitsu] log_sense cmd: 0
[fujitsu] log_select cmd: 0
[fujitsu] change cmd: 0
[fujitsu] read_buffer cmd: 0
[fujitsu] write_buffer cmd: 0
[fujitsu] copy_and_verify cmd: 0
[fujitsu] compare cmd: 0
[fujitsu] get_d_b_status cmd: 0
[fujitsu] object_pos cmd: 1
[fujitsu] send cmd: 1
[fujitsu] read cmd: 1
[fujitsu] get_window cmd: 0
[fujitsu] set_window cmd: 1
[fujitsu] send_diag cmd: 1
[fujitsu] read_diag cmd: 1
[fujitsu] scan cmd: 1
[fujitsu] mode_sense_6 cmd: 1
[fujitsu] copy cmd: 0
[fujitsu] release cmd: 1
[fujitsu] reserve_unit cmd: 1
[fujitsu] mode_select_6 cmd: 1
[fujitsu] inquiry cmd: 1
[fujitsu] request_sense cmd: 1
[fujitsu] test_unit_ready cmd: 1
[fujitsu] Vendor commands
[fujitsu] subwindow cmd: 0
[fujitsu] endorser cmd: 0
[fujitsu] hardware status cmd: 1
[fujitsu] hardware status 2 cmd: 0
[fujitsu] hardware status 3 cmd: 0
[fujitsu] scanner control cmd: 1
[fujitsu] device restart cmd: 1
[fujitsu] brightness steps: 0
[fujitsu] threshold steps: 255
[fujitsu] contrast steps: 0
[fujitsu] built in gamma patterns: 0
[fujitsu] download gamma patterns: 1
[fujitsu] built in dither patterns: 4
[fujitsu] download dither patterns: 1
[fujitsu] RIF: 1
[fujitsu] DTC (AutoI): 0
[fujitsu] SDTC (AutoII): 1
[fujitsu] outline extraction: 0
[fujitsu] image emphasis: 1
[fujitsu] automatic separation: 0
[fujitsu] mirror image: 0
[fujitsu] white level follower: 0
[fujitsu] subwindow: 0
[fujitsu] diffusion: 1
[fujitsu] ipc3: 0
[fujitsu] rotation: 0
[fujitsu] hybrid crop deskew: 0
[fujitsu] ipc2 byte 67: 0
[fujitsu] compression MH: 0
[fujitsu] compression MR: 0
[fujitsu] compression MMR: 0
[fujitsu] compression JBIG: 0
[fujitsu] compression JPG1: 1
[fujitsu] (Disabled)
[fujitsu] compression JPG2: 0
[fujitsu] compression JPG3: 0
[fujitsu] back endorser mech: 0
[fujitsu] back endorser stamp: 0
[fujitsu] back endorser elec: 0
[fujitsu] endorser max id: 0
[fujitsu] front endorser mech: 0
[fujitsu] front endorser stamp: 0
[fujitsu] front endorser elec: 0
[fujitsu] back endorser type: 0
[fujitsu] back endorser type: 0
[fujitsu] connection type: 3
[fujitsu] endorser ext: 0
[fujitsu] endorser pr_b: 0
[fujitsu] endorser pr_f: 0
[fujitsu] endorser po_b: 0
[fujitsu] endorser po_f: 0
[fujitsu] horizontal overscan: 153
[fujitsu] vertical overscan: 153
[fujitsu] default bg adf b: 0
[fujitsu] default bg adf f: 0
[fujitsu] default bg fb: 0
[fujitsu] auto color: 1
[fujitsu] blank skip: 1
[fujitsu] multi image: 0
[fujitsu] f b type indep: 0
[fujitsu] f b res indep: 0
[fujitsu] dropout spec: 0
[fujitsu] dropout non: 0
[fujitsu] dropout white: 0
[fujitsu] skew check: 0
[fujitsu] new feed roller: 0
[fujitsu] paper count: 0
[fujitsu] paper number: 0
[fujitsu] ext send to: 0
[fujitsu] staple det: 0
[fujitsu] pause host: 0
[fujitsu] pause panel: 0
[fujitsu] pause conf: 0
[fujitsu] hq print: 0
[fujitsu] ext GHS len: 0
[fujitsu] smbc func: 0
[fujitsu] imprint chk b: 0
[fujitsu] imprint chk f: 0
[fujitsu] force w bg: 0
[fujitsu] mf recover lvl: 0
[fujitsu] first read time: 1
[fujitsu] div scanning: 0
[fujitsu] start job: 1
[fujitsu] lifetime log: 1
[fujitsu] imff save rest: 0
[fujitsu] wide scsi type: 0
[fujitsu] lut hybrid crop: 0
[fujitsu] over under amt: 0
[fujitsu] rgb lut: 0
[fujitsu] num lut dl: 0
[fujitsu] ErP Lot6 (power off timer): 1
[fujitsu] sync next feed: 1
[fujitsu] object postion halt: 0
[fujitsu] init_vpd: finish
[fujitsu] init_ms: start
[fujitsu] autocolor: 0
[fujitsu] prepick: 0
[fujitsu] sleep: 0
[fujitsu] duplex: 0
[fujitsu] rand: 0
[fujitsu] bg: 0
[fujitsu] df: 0
[fujitsu] dropout: 0
[fujitsu] buff: 0
[fujitsu] auto: 0
[fujitsu] lamp: 0
[fujitsu] jobsep: 0
[fujitsu] init_ms: finish
[fujitsu] init_model: start
[fujitsu] init_model: finish
[fujitsu] init_user: start
[fujitsu] init_user: finish
[fujitsu] init_options: start
[fujitsu] init_options: finish
[fujitsu] init_interlace: start
[fujitsu] update_params: start
[fujitsu] update_params: x: max=10448, page=10200, gpw=10200, res=600
[fujitsu] update_params: y: max=41424, page=13200, gph=13200, res=600
[fujitsu] update_params: area: tlx=0, brx=10200, tly=0, bry=13200
[fujitsu] update_params: params: ppl=5100, Bpl=15300, lines=6600
[fujitsu] update_params: params: format=1, depth=8, last=1
[fujitsu] update_u_params: start
[fujitsu] update_u_params: finish
[fujitsu] update_params: finish
[fujitsu] init_interlace: color_interlace: 1
[fujitsu] init_interlace: finish
[fujitsu] init_serial: start
[fujitsu] do_usb_cmd: start
[fujitsu] do_usb_cmd: finish
[fujitsu] do_usb_cmd: start
[fujitsu] do_usb_cmd: finish
[fujitsu] init_serial: found sn 64324
[fujitsu] init_serial: serial_name: ScanSnap iX500:64324
[fujitsu] init_serial: finish
[fujitsu] disconnect_fd: start
[fujitsu] disconnecting usb device
[fujitsu] disconnect_fd: finish
[fujitsu] attach_one: finish
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132c'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132d'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132e'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132f'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x13f4'
[fujitsu] sane_get_devices: found scanner libusb:003:004
[fujitsu] sane_get_devices: found 1 scanner(s)
[fujitsu] sane_get_devices: finish
device `fujitsu:ScanSnap iX500:64324' is a FUJITSU ScanSnap iX500 scanner
[fujitsu] sane_exit: start
[fujitsu] disconnect_fd: start
[fujitsu] disconnect_fd: finish
[fujitsu] sane_exit: finish
[sanei_debug] Setting debug level of fujitsu to 15.
[fujitsu] sane_init: start
[fujitsu] sane_init: fujitsu backend 1.0.127, from sane-backends 1.0.25
[fujitsu] sane_init: finish
[fujitsu] sane_get_devices: start
[fujitsu] sane_get_devices: reading config file fujitsu.conf
[fujitsu] sane_get_devices: setting "buffer-size" to 65536
[fujitsu] sane_get_devices: looking for 'scsi FUJITSU'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1041'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1042'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1078'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1095'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1096'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1097'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10ad'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10ae'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10af'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10cf'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e0'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e1'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e2'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e6'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e7'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10f2'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10fe'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1135'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114a'
[fujitsu] sane_get_devices: config option "buffer-size" (262144) is >
65536, warning!
[fujitsu] sane_get_devices: setting "buffer-size" to 262144
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114d'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114e'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114f'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1150'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1155'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x116f'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1174'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1175'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1176'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1177'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1178'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x119d'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x119e'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11a2'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f1'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f2'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f3'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f4'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11fc'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1213'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x128e'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132b'
[fujitsu] attach_one: start
[fujitsu] attach_one: looking for 'libusb:003:004'
[fujitsu] connect_fd: start
[fujitsu] connect_fd: opening USB device
[fujitsu] wait_scanner: start
[fujitsu] do_usb_cmd: start
[fujitsu] stat: return error 'Error during device I/O'
[fujitsu] WARNING: Brain-dead scanner. Hitting with stick
[fujitsu] do_usb_cmd: start
[fujitsu] stat: return error 'Error during device I/O'
[fujitsu] WARNING: Brain-dead scanner. Hitting with stick again
[fujitsu] do_usb_cmd: start
[fujitsu] stat: return error 'Error during device I/O'
[fujitsu] wait_scanner: error 'Error during device I/O'
[fujitsu] wait_scanner: finish
[fujitsu] connect_fd: could not wait_scanner
[fujitsu] disconnect_fd: start
[fujitsu] disconnecting usb device
[fujitsu] disconnect_fd: finish
[fujitsu] connect_fd: finish
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132c'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132d'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132e'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132f'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x13f4'
[fujitsu] sane_get_devices: found 0 scanner(s)
[fujitsu] sane_get_devices: finish
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
[fujitsu] sane_exit: start
[fujitsu] sane_exit: finish
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure
that
# you have loaded a kernel SCSI driver for your SCSI adapter.
could not open USB device 0x8087/0x8001 at 001:002: Access denied
(insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 001:001: Access denied
(insufficient permissions)
found USB scanner (vendor=0x04c5 [Fujitsu], product=0x132b [ScanSnap
iX500]) at libusb:003:004
could not open USB device 0x1d6b/0x0003 at 003:001: Access denied
(insufficient permissions)
could not open USB device 0x04f2/0xb45d at 002:005: Access denied
(insufficient permissions)
could not open USB device 0x8087/0x0a2a at 002:004: Access denied
(insufficient permissions)
could not open USB device 0x138a/0x0017 at 002:003: Access denied
(insufficient permissions)
could not open USB device 0x04f3/0x012d at 002:002: Access denied
(insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 002:001: Access denied
(insufficient permissions)
# Your USB scanner was (probably) detected. It may or may not be supported
by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary
Again after I plug the USB in my computer...
[sanei_debug] Setting debug level of snapscan to 128.
[snapscan] sane_snapscan_init
[snapscan] sane_snapscan_init: Snapscan backend version 1.4.53
[snapscan] sane_snapscan_get_devices (0x7ffd9e003240, 0)
device `fujitsu:ScanSnap iX500:64324' is a FUJITSU ScanSnap iX500 scanner
[snapscan] sane_snapscan_exit
[sanei_debug] Setting debug level of snapscan to 128.
[snapscan] sane_snapscan_init
[snapscan] sane_snapscan_init: Snapscan backend version 1.4.53
[snapscan] sane_snapscan_get_devices (0x7ffd2ac76300, 0)
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
[snapscan] sane_snapscan_exit
Thanks Jiri
--
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe your_password"
--
"well, I stand up next to a mountain- and I chop it down with the edge
of my hand"
--
sane-devel mailing list: sane-***@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe your_password"
to sane-devel-***@lists.alioth.debian.org
m. allan noah
2017-10-23 14:07:02 UTC
Permalink
Raw Message
The SANE_USB_WORKAROUND env var was added in sane-backends 1.0.27, so
I recommend an upgrade.

allan
Hi Allan,
Thank you for your response. I really appreciate it.
Currently I have latest sane-backends from Debian SID. Do I have to install
the developer version or the SANE_USB_WORKAROUND variable also works in
current debian version? As a workaround I might prefer to use the USB 2.0
Type B plug until everything is fixed in the future or until I get new
scanner. This is much easier workaround then maintaining the developer
version. :). I can also try the experimental repo with sane-backends
(1.0.27-1~experimental2) if needed.
Here are some details for you.
# dpkg -l | grep libsane
ii libsane:amd64 1.0.25-4.1
ii libsane-common 1.0.25-4.1
ii libsane-extras:amd64 1.0.22.5
ii libsane-extras-common 1.0.22.5
-------------------------------------------------------
device `fujitsu:ScanSnap iX500:64324' is a FUJITSU ScanSnap iX500 scanner
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure
that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x04c5 [Fujitsu], product=0x132b [ScanSnap iX500])
at libusb:002:021
could not open USB device 0x1d6b/0x0003 at 002:001: Access denied
(insufficient permissions)
could not open USB device 0x1bcf/0x2c6b at 001:004: Access denied
(insufficient permissions)
could not open USB device 0x1044/0x7a06 at 001:003: Access denied
(insufficient permissions)
could not open USB device 0x8087/0x0a2b at 001:002: Access denied
(insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 001:001: Access denied
(insufficient permissions)
# Your USB scanner was (probably) detected. It may or may not be supported
by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
-------------------------------------
device `fujitsu:ScanSnap iX500:64324' is a FUJITSU ScanSnap iX500 scanner
device `fujitsu:ScanSnap iX500:64324' is a FUJITSU ScanSnap iX500 scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure
that
# you have loaded a kernel SCSI driver for your SCSI adapter.
could not open USB device 0x1d6b/0x0003 at 002:001: Access denied
(insufficient permissions)
could not open USB device 0x1bcf/0x2c6b at 001:004: Access denied
(insufficient permissions)
could not open USB device 0x1044/0x7a06 at 001:003: Access denied
(insufficient permissions)
could not open USB device 0x8087/0x0a2b at 001:002: Access denied
(insufficient permissions)
found USB scanner (vendor=0x04c5 [Fujitsu], product=0x132b [ScanSnap iX500])
at libusb:001:024
could not open USB device 0x1d6b/0x0002 at 001:001: Access denied
(insufficient permissions)
# Your USB scanner was (probably) detected. It may or may not be supported
by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
- Jiri
Post by m. allan noah
What was the outcome from my suggestions last year?
allan
Hi,
1. When I use USB 3.0 Type B Plug connector (cable which comes with the
scanner), scanimage -L recognizes the scanner only once and applications
like Simple Scan or Skanlite are not able to scan.
2. However when I use USB 2.0 Type B Plug connector (i used cable from my
externar HDD), everything seems to work just fine.
My notebook has got all USB ports USB 3.0 and I don't have USB 2 hub to
test.
Anyway using cable with old USB 2.0 B plug is simple workaround.
If I can provide any debug data, which can help to fix the issue, please
let me know and I can provide it for both cables.
- Jiri
Post by m. allan noah
You did not tell us what you upgraded? Sane-backends, your scanner,
your
kernel?
This sounds like a pretty typical linux usb bug. You might need to
install a development version of sane-backends from our git repo. Once
you have built and installed a sane-backends git snapshot (using the
info in README.linux), you can run scanimage -L repeatedly. You may
find that the scanner only shows up intermittently. If that is the
SANE_USB_WORKAROUND=1 scanimage -L
That might work better. If so, you will have to put
SANE_USB_WORKAROUND=1 into your environment.
Oh, and BTW, your scanner is not supported by the snapscan backend.
Try fujitsu instead.
allan
Post by Jiri
Hi,
[Debian Sid]
I started having problem with Fujitsu iX500 scanner after upgrade. It
used
to work fine, but now it seems the system identifies the scanner for
a
just
a while and but apps cannot use it.
Here is example. I run the following command two times right after each
other. The scanner is recognized on first run (after plugging USB in),
but
when I run it second time it says the scanner was not identified.
Any help would be appreciated.
[sanei_debug] Setting debug level of fujitsu to 15.
[fujitsu] sane_init: start
[fujitsu] sane_init: fujitsu backend 1.0.127, from sane-backends 1.0.25
[fujitsu] sane_init: finish
[fujitsu] sane_get_devices: start
[fujitsu] sane_get_devices: reading config file fujitsu.conf
[fujitsu] sane_get_devices: setting "buffer-size" to 65536
[fujitsu] sane_get_devices: looking for 'scsi FUJITSU'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1041'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1042'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1078'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1095'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1096'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1097'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10ad'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10ae'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10af'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10cf'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e0'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e1'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e2'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e6'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e7'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10f2'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10fe'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1135'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114a'
[fujitsu] sane_get_devices: config option "buffer-size" (262144) is >
65536, warning!
[fujitsu] sane_get_devices: setting "buffer-size" to 262144
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114d'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114e'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114f'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1150'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1155'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x116f'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1174'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1175'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1176'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1177'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1178'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x119d'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x119e'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11a2'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f1'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f2'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f3'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f4'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11fc'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1213'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x128e'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132b'
[fujitsu] attach_one: start
[fujitsu] attach_one: looking for 'libusb:003:004'
[fujitsu] connect_fd: start
[fujitsu] connect_fd: opening USB device
[fujitsu] wait_scanner: start
[fujitsu] do_usb_cmd: start
[fujitsu] do_usb_cmd: finish
[fujitsu] wait_scanner: finish
[fujitsu] connect_fd: finish
[fujitsu] init_inquire: start
[fujitsu] do_usb_cmd: start
[fujitsu] do_usb_cmd: finish
[fujitsu] init_inquire: Found FUJITSU scanner ScanSnap iX500 version
0L00
at libusb:003:004
[fujitsu] inquiry options
[fujitsu] color offset: 0 lines
[fujitsu] long gray scan: 1
[fujitsu] long color scan: 1
[fujitsu] emulation mode: 0
[fujitsu] CMP/CGA: 0
[fujitsu] background back: 0
[fujitsu] background front: 0
[fujitsu] background fb: 0
[fujitsu] back only scan: 1
[fujitsu] duplex offset: 0 lines
[fujitsu] init_inquire: finish
[fujitsu] init_vpd: start
[fujitsu] do_usb_cmd: start
[fujitsu] do_usb_cmd: finish
[fujitsu] init_vpd: length=8b
[fujitsu] standard options
[fujitsu] basic x res: 600 dpi
[fujitsu] basic y res: 600 dpi
[fujitsu] step x res: 1 dpi
[fujitsu] step y res: 1 dpi
[fujitsu] max x res: 600 dpi
[fujitsu] max y res: 600 dpi
[fujitsu] min x res: 50 dpi
[fujitsu] min y res: 50 dpi
[fujitsu] 60 dpi: 1
[fujitsu] 75 dpi: 1
[fujitsu] 100 dpi: 1
[fujitsu] 120 dpi: 1
[fujitsu] 150 dpi: 1
[fujitsu] 160 dpi: 1
[fujitsu] 180 dpi: 1
[fujitsu] 200 dpi: 1
[fujitsu] 240 dpi: 1
[fujitsu] 300 dpi: 1
[fujitsu] 320 dpi: 1
[fujitsu] 400 dpi: 1
[fujitsu] 480 dpi: 1
[fujitsu] 600 dpi: 1
[fujitsu] 800 dpi: 0
[fujitsu] 1200 dpi: 0
[fujitsu] max width: 8.71 inches
[fujitsu] max length: 34.52 inches
[fujitsu] overflow: 1
[fujitsu] monochrome: 1
[fujitsu] halftone: 1
[fujitsu] grayscale: 1
[fujitsu] color_monochrome: 0
[fujitsu] color_halftone: 0
[fujitsu] color_grayscale: 1
[fujitsu] vendor options
[fujitsu] adf: 1
[fujitsu] flatbed: 0
[fujitsu] transparency: 0
[fujitsu] duplex: 1
[fujitsu] back endorser: 0
[fujitsu] barcode: 0
[fujitsu] operator panel: 1
[fujitsu] front endorser: 0
[fujitsu] multi-purpose stacker: 0
[fujitsu] prepick: 0
[fujitsu] mf detect: 0
[fujitsu] paper protection: 0
[fujitsu] A/D bits: 10
[fujitsu] buffer bytes: 402653184
[fujitsu] Standard commands
[fujitsu] mode_sense_10 cmd: 0
[fujitsu] mode_select_10 cmd: 0
[fujitsu] log_sense cmd: 0
[fujitsu] log_select cmd: 0
[fujitsu] change cmd: 0
[fujitsu] read_buffer cmd: 0
[fujitsu] write_buffer cmd: 0
[fujitsu] copy_and_verify cmd: 0
[fujitsu] compare cmd: 0
[fujitsu] get_d_b_status cmd: 0
[fujitsu] object_pos cmd: 1
[fujitsu] send cmd: 1
[fujitsu] read cmd: 1
[fujitsu] get_window cmd: 0
[fujitsu] set_window cmd: 1
[fujitsu] send_diag cmd: 1
[fujitsu] read_diag cmd: 1
[fujitsu] scan cmd: 1
[fujitsu] mode_sense_6 cmd: 1
[fujitsu] copy cmd: 0
[fujitsu] release cmd: 1
[fujitsu] reserve_unit cmd: 1
[fujitsu] mode_select_6 cmd: 1
[fujitsu] inquiry cmd: 1
[fujitsu] request_sense cmd: 1
[fujitsu] test_unit_ready cmd: 1
[fujitsu] Vendor commands
[fujitsu] subwindow cmd: 0
[fujitsu] endorser cmd: 0
[fujitsu] hardware status cmd: 1
[fujitsu] hardware status 2 cmd: 0
[fujitsu] hardware status 3 cmd: 0
[fujitsu] scanner control cmd: 1
[fujitsu] device restart cmd: 1
[fujitsu] brightness steps: 0
[fujitsu] threshold steps: 255
[fujitsu] contrast steps: 0
[fujitsu] built in gamma patterns: 0
[fujitsu] download gamma patterns: 1
[fujitsu] built in dither patterns: 4
[fujitsu] download dither patterns: 1
[fujitsu] RIF: 1
[fujitsu] DTC (AutoI): 0
[fujitsu] SDTC (AutoII): 1
[fujitsu] outline extraction: 0
[fujitsu] image emphasis: 1
[fujitsu] automatic separation: 0
[fujitsu] mirror image: 0
[fujitsu] white level follower: 0
[fujitsu] subwindow: 0
[fujitsu] diffusion: 1
[fujitsu] ipc3: 0
[fujitsu] rotation: 0
[fujitsu] hybrid crop deskew: 0
[fujitsu] ipc2 byte 67: 0
[fujitsu] compression MH: 0
[fujitsu] compression MR: 0
[fujitsu] compression MMR: 0
[fujitsu] compression JBIG: 0
[fujitsu] compression JPG1: 1
[fujitsu] (Disabled)
[fujitsu] compression JPG2: 0
[fujitsu] compression JPG3: 0
[fujitsu] back endorser mech: 0
[fujitsu] back endorser stamp: 0
[fujitsu] back endorser elec: 0
[fujitsu] endorser max id: 0
[fujitsu] front endorser mech: 0
[fujitsu] front endorser stamp: 0
[fujitsu] front endorser elec: 0
[fujitsu] back endorser type: 0
[fujitsu] back endorser type: 0
[fujitsu] connection type: 3
[fujitsu] endorser ext: 0
[fujitsu] endorser pr_b: 0
[fujitsu] endorser pr_f: 0
[fujitsu] endorser po_b: 0
[fujitsu] endorser po_f: 0
[fujitsu] horizontal overscan: 153
[fujitsu] vertical overscan: 153
[fujitsu] default bg adf b: 0
[fujitsu] default bg adf f: 0
[fujitsu] default bg fb: 0
[fujitsu] auto color: 1
[fujitsu] blank skip: 1
[fujitsu] multi image: 0
[fujitsu] f b type indep: 0
[fujitsu] f b res indep: 0
[fujitsu] dropout spec: 0
[fujitsu] dropout non: 0
[fujitsu] dropout white: 0
[fujitsu] skew check: 0
[fujitsu] new feed roller: 0
[fujitsu] paper count: 0
[fujitsu] paper number: 0
[fujitsu] ext send to: 0
[fujitsu] staple det: 0
[fujitsu] pause host: 0
[fujitsu] pause panel: 0
[fujitsu] pause conf: 0
[fujitsu] hq print: 0
[fujitsu] ext GHS len: 0
[fujitsu] smbc func: 0
[fujitsu] imprint chk b: 0
[fujitsu] imprint chk f: 0
[fujitsu] force w bg: 0
[fujitsu] mf recover lvl: 0
[fujitsu] first read time: 1
[fujitsu] div scanning: 0
[fujitsu] start job: 1
[fujitsu] lifetime log: 1
[fujitsu] imff save rest: 0
[fujitsu] wide scsi type: 0
[fujitsu] lut hybrid crop: 0
[fujitsu] over under amt: 0
[fujitsu] rgb lut: 0
[fujitsu] num lut dl: 0
[fujitsu] ErP Lot6 (power off timer): 1
[fujitsu] sync next feed: 1
[fujitsu] object postion halt: 0
[fujitsu] init_vpd: finish
[fujitsu] init_ms: start
[fujitsu] autocolor: 0
[fujitsu] prepick: 0
[fujitsu] sleep: 0
[fujitsu] duplex: 0
[fujitsu] rand: 0
[fujitsu] bg: 0
[fujitsu] df: 0
[fujitsu] dropout: 0
[fujitsu] buff: 0
[fujitsu] auto: 0
[fujitsu] lamp: 0
[fujitsu] jobsep: 0
[fujitsu] init_ms: finish
[fujitsu] init_model: start
[fujitsu] init_model: finish
[fujitsu] init_user: start
[fujitsu] init_user: finish
[fujitsu] init_options: start
[fujitsu] init_options: finish
[fujitsu] init_interlace: start
[fujitsu] update_params: start
[fujitsu] update_params: x: max=10448, page=10200, gpw=10200, res=600
[fujitsu] update_params: y: max=41424, page=13200, gph=13200, res=600
[fujitsu] update_params: area: tlx=0, brx=10200, tly=0, bry=13200
[fujitsu] update_params: params: ppl=5100, Bpl=15300, lines=6600
[fujitsu] update_params: params: format=1, depth=8, last=1
[fujitsu] update_u_params: start
[fujitsu] update_u_params: finish
[fujitsu] update_params: finish
[fujitsu] init_interlace: color_interlace: 1
[fujitsu] init_interlace: finish
[fujitsu] init_serial: start
[fujitsu] do_usb_cmd: start
[fujitsu] do_usb_cmd: finish
[fujitsu] do_usb_cmd: start
[fujitsu] do_usb_cmd: finish
[fujitsu] init_serial: found sn 64324
[fujitsu] init_serial: serial_name: ScanSnap iX500:64324
[fujitsu] init_serial: finish
[fujitsu] disconnect_fd: start
[fujitsu] disconnecting usb device
[fujitsu] disconnect_fd: finish
[fujitsu] attach_one: finish
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132c'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132d'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132e'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132f'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x13f4'
[fujitsu] sane_get_devices: found scanner libusb:003:004
[fujitsu] sane_get_devices: found 1 scanner(s)
[fujitsu] sane_get_devices: finish
device `fujitsu:ScanSnap iX500:64324' is a FUJITSU ScanSnap iX500
scanner
[fujitsu] sane_exit: start
[fujitsu] disconnect_fd: start
[fujitsu] disconnect_fd: finish
[fujitsu] sane_exit: finish
[sanei_debug] Setting debug level of fujitsu to 15.
[fujitsu] sane_init: start
[fujitsu] sane_init: fujitsu backend 1.0.127, from sane-backends 1.0.25
[fujitsu] sane_init: finish
[fujitsu] sane_get_devices: start
[fujitsu] sane_get_devices: reading config file fujitsu.conf
[fujitsu] sane_get_devices: setting "buffer-size" to 65536
[fujitsu] sane_get_devices: looking for 'scsi FUJITSU'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1041'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1042'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1078'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1095'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1096'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1097'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10ad'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10ae'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10af'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10cf'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e0'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e1'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e2'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e6'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e7'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10f2'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10fe'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1135'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114a'
[fujitsu] sane_get_devices: config option "buffer-size" (262144) is >
65536, warning!
[fujitsu] sane_get_devices: setting "buffer-size" to 262144
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114d'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114e'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114f'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1150'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1155'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x116f'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1174'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1175'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1176'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1177'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1178'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x119d'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x119e'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11a2'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f1'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f2'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f3'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f4'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11fc'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1213'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x128e'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132b'
[fujitsu] attach_one: start
[fujitsu] attach_one: looking for 'libusb:003:004'
[fujitsu] connect_fd: start
[fujitsu] connect_fd: opening USB device
[fujitsu] wait_scanner: start
[fujitsu] do_usb_cmd: start
[fujitsu] stat: return error 'Error during device I/O'
[fujitsu] WARNING: Brain-dead scanner. Hitting with stick
[fujitsu] do_usb_cmd: start
[fujitsu] stat: return error 'Error during device I/O'
[fujitsu] WARNING: Brain-dead scanner. Hitting with stick again
[fujitsu] do_usb_cmd: start
[fujitsu] stat: return error 'Error during device I/O'
[fujitsu] wait_scanner: error 'Error during device I/O'
[fujitsu] wait_scanner: finish
[fujitsu] connect_fd: could not wait_scanner
[fujitsu] disconnect_fd: start
[fujitsu] disconnecting usb device
[fujitsu] disconnect_fd: finish
[fujitsu] connect_fd: finish
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132c'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132d'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132e'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132f'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x13f4'
[fujitsu] sane_get_devices: found 0 scanner(s)
[fujitsu] sane_get_devices: finish
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the
documentation
which came with this software (README, FAQ, manpages).
[fujitsu] sane_exit: start
[fujitsu] sane_exit: finish
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make
sure
that
# you have loaded a kernel SCSI driver for your SCSI adapter.
could not open USB device 0x8087/0x8001 at 001:002: Access denied
(insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 001:001: Access denied
(insufficient permissions)
found USB scanner (vendor=0x04c5 [Fujitsu], product=0x132b [ScanSnap
iX500]) at libusb:003:004
could not open USB device 0x1d6b/0x0003 at 003:001: Access denied
(insufficient permissions)
could not open USB device 0x04f2/0xb45d at 002:005: Access denied
(insufficient permissions)
could not open USB device 0x8087/0x0a2a at 002:004: Access denied
(insufficient permissions)
could not open USB device 0x138a/0x0017 at 002:003: Access denied
(insufficient permissions)
could not open USB device 0x04f3/0x012d at 002:002: Access denied
(insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 002:001: Access denied
(insufficient permissions)
# Your USB scanner was (probably) detected. It may or may not be
supported
by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary
ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once
you
# found the scanner devices, be sure to adjust access permissions as
# necessary
Again after I plug the USB in my computer...
[sanei_debug] Setting debug level of snapscan to 128.
[snapscan] sane_snapscan_init
[snapscan] sane_snapscan_init: Snapscan backend version 1.4.53
[snapscan] sane_snapscan_get_devices (0x7ffd9e003240, 0)
device `fujitsu:ScanSnap iX500:64324' is a FUJITSU ScanSnap iX500
scanner
[snapscan] sane_snapscan_exit
[sanei_debug] Setting debug level of snapscan to 128.
[snapscan] sane_snapscan_init
[snapscan] sane_snapscan_init: Snapscan backend version 1.4.53
[snapscan] sane_snapscan_get_devices (0x7ffd2ac76300, 0)
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the
documentation
which came with this software (README, FAQ, manpages).
[snapscan] sane_snapscan_exit
Thanks Jiri
--
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe your_password"
--
"well, I stand up next to a mountain- and I chop it down with the edge
of my hand"
--
sane-devel mailing list: sane-***@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe your_password"
to sane-devel-***@lists.alioth.debian.org
Loading...