Discussion:
[sane-devel] [inactive] options
ylafont
2017-11-29 15:34:18 UTC
Permalink
I am trying to scan legal size pager over the ADF, when setting the Scan
area to legal on the command line, they are changed back to letter size

*scanimage: rounded value of br-x from 215.9 to 215.872
scanimage: rounded value of br-y from 355.6 to 279.364
*

There are inactive options listed for the backend, Is there a method of
activating them for this purpose?

*All options specific to device `net:localhost:fujitsu:fi-4220C2dj:100742':
*
Geometry:
-l 0..224.846mm (in steps of 0.0211639) [0]
Top-left x position of scan area.
-t 0..296.972mm (in steps of 0.0211639) [0]
Top-left y position of scan area.
-x 0..224.846mm (in steps of 0.0211639) [215.872]
Width of scan-area.
-y 0..296.972mm (in steps of 0.0211639) [279.364]
Height of scan-area.
* --page-width 0..224.846mm (in steps of 0.0211639) [inactive]*
Specifies the width of the media. Required for automatic centering
of
* sheet-fed scans.
--page-height 0..863.489mm (in steps of 0.0211639) [inactive]*
Specifies the height of the media.


*backend - fujitsu:fi-4220C2dj:*

*scanimage (sane-backends) 1.0.22; backend version 1.0.22*

Any assistance is greatly appreciated. Thank you in advance.



--
Sent from: http://sane.10972.n7.nabble.com/SANE-Dev-f3.html
--
sane-devel mailing list: sane-***@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe your_password"
to sane-devel-***@lists.alioth.debian.org
Olaf Meeuwissen
2017-11-30 11:19:10 UTC
Permalink
Hi,
Post by ylafont
I am trying to scan legal size pager over the ADF, when setting the Scan
area to legal on the command line, they are changed back to letter size
*scanimage: rounded value of br-x from 215.9 to 215.872
scanimage: rounded value of br-y from 355.6 to 279.364
*
There are inactive options listed for the backend, Is there a method of
activating them for this purpose?
*
-l 0..224.846mm (in steps of 0.0211639) [0]
Top-left x position of scan area.
-t 0..296.972mm (in steps of 0.0211639) [0]
Top-left y position of scan area.
-x 0..224.846mm (in steps of 0.0211639) [215.872]
Width of scan-area.
-y 0..296.972mm (in steps of 0.0211639) [279.364]
Height of scan-area.
* --page-width 0..224.846mm (in steps of 0.0211639) [inactive]*
Specifies the width of the media. Required for automatic centering
of
* sheet-fed scans.
--page-height 0..863.489mm (in steps of 0.0211639) [inactive]*
Specifies the height of the media.
Are these *really* *all* the options? I'd expect some option to select
the APF (assuming this device also does flatbed/glass plate). If there
is such an option, try fiddling with the ordering. Specifically, put
the option selecting the ADF first.
Post by ylafont
*backend - fujitsu:fi-4220C2dj:*
*scanimage (sane-backends) 1.0.22; backend version 1.0.22*
Any assistance is greatly appreciated. Thank you in advance.
Hope this helps,
--
Olaf Meeuwissen, LPIC-2 FSF Associate Member since 2004-01-27
GnuPG key: F84A2DD9/B3C0 2F47 EA19 64F4 9F13 F43E B8A4 A88A F84A 2DD9
Support Free Software https://my.fsf.org/donate
Join the Free Software Foundation https://my.fsf.org/join
--
sane-devel mailing list: sane-***@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe your_password"
to sane-devel-***@lists.alioth.debian.org
m. allan noah
2017-11-30 12:14:38 UTC
Permalink
The page size options are disabled when you are using the flatbed, but
you should not need them. The bounds of the x/y options should be set
to the maximum supported by the flatbed in that case. It is possible
this is a bug in the old version of sane-backends you are using. Can
you provide your complete command line you are using with scanimage,
and all the options as listed by scanimage --help?

Also, please don't use nabble. It lies and says the emails came from
yahoo when they did not, which causes your mail to be sent to spam
filters.

allan
Post by ylafont
I am trying to scan legal size pager over the ADF, when setting the Scan
area to legal on the command line, they are changed back to letter size
*scanimage: rounded value of br-x from 215.9 to 215.872
scanimage: rounded value of br-y from 355.6 to 279.364
*
There are inactive options listed for the backend, Is there a method of
activating them for this purpose?
*
-l 0..224.846mm (in steps of 0.0211639) [0]
Top-left x position of scan area.
-t 0..296.972mm (in steps of 0.0211639) [0]
Top-left y position of scan area.
-x 0..224.846mm (in steps of 0.0211639) [215.872]
Width of scan-area.
-y 0..296.972mm (in steps of 0.0211639) [279.364]
Height of scan-area.
* --page-width 0..224.846mm (in steps of 0.0211639) [inactive]*
Specifies the width of the media. Required for automatic centering
of
* sheet-fed scans.
--page-height 0..863.489mm (in steps of 0.0211639) [inactive]*
Specifies the height of the media.
*backend - fujitsu:fi-4220C2dj:*
*scanimage (sane-backends) 1.0.22; backend version 1.0.22*
Any assistance is greatly appreciated. Thank you in advance.
--
Sent from: http://sane.10972.n7.nabble.com/SANE-Dev-f3.html
--
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe your_password"
--
"well, I stand up next to a mountain- and I chop it down with the edge
of my hand"
--
sane-devel mailing list: sane-***@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe your_password"
to sane-devel-***@lists.alioth.debian.org
Loading...